DNC Workwear Inherent FR PPE2 Midweight Day/Night Shirt (3456)
Solid front & back, open front with FR nylon press studs & concealed snap closure. Gusset sleeves, under arm & upper back FR mesh venting. Twin chest shaped flap pockets with FR Nylon press studs, 2 piece structured collar, 2 way radio loops, FR thread, twin chest flap pocket with FR Nylon press studs, FR printed outer label. No metal components. Double FR stitching, Standard hoop pattern LOXY Sto-nor 9801 FR Reflective Tape.
Attributes
- SUN Protection UPF 50+ - DNC garments are tested for UPF (ultraviolet protection factor) in accordance with AS/NZS4399:1996. The level of protection varies depending on the fabric and colour of the garment. 15+ good protection, 30+ / 35+ very good protection, 40+ / 50+ excellent protection
- HiVis D/N Fabric & Design - DNC HiVis garments are manufactured to comply with New Hi Vis standard Class F AS/NZS1906.4:2010, Class DIN, AS/NZS 4602.1:2011 to meet the requirements of HiVis Safety standards HiVis Fabric & Design of garments, for day and night use.
- COOL- BREEZE Airflow Vents - The Airflow cooling system removes sweat and body heat through innovative under-arm vents, upper back or vertical vents, airflow eyelets between legs.
- Carbon grid Anti-static - The latest technology is used in the production of DNC Flame retardant + Carbon grid Anti-static 98% Polyester/PU, 2% Carbon, breathable waterproof fabric rain jacket, vest & pants. DNC cotton garments containing no metal buttons/zip are also classified under Anti-static garments. (Complies with EN ISO 14116:2008 for FR & BS EN1149-5:2008 for Anti-static).
- Environmentally Friendly Green Dye - Safe to wear against the skin. All DNC garments use the Green Dye only. All DNC garment fabric fully complies with Oeko-Tex standard 100 class II for products with direct contact to the skin in which prohibited to use aromatic amines, sensitizing dyes and cancer risk dyes. (Oeko-Tex Standard 100)
- LOXY 9801 FRA.Tape - DNC use premium LOXY Sto-nor 9801 Flame Resistant (FR) Tape through our Flame Resistant Range. LOXY Sto-nor 9801 FR Tape - Rated for Industrial wash 50 cycles @ 60°C. (Complies with ISO14 116/FR, NFPA2112/FR; EN 1149-3/Anti-Static, AS/NZS1906.4/Hi-Vis.)
- ISO 14116:2015 (FR) - prescribes the performance criteria for material assemblies and protective clothing to minimise the risk of clothing igniting when exposed to small flames during short and intermittent contact, thereby minimising the potential hazard.
- ISO 11612:2015 (FR) - This clothing aims to shield the wearer from splashes of molten metal, brief exposure to flames, radiant heat from electric arcs, and hazards related to welding and similar activities. It also provides limited protection against electrical shock during short-term contact with live electrical conductors of around 100 volts (Note: Sweat, soiling, or other contaminants can impact the level of protection).
- NENS09:2014 - Selected by Energy Networks Australia, use and maintenance of Personal Protective Equipment (PPE) used to protect people against electrical arc hazards within the Electricity Supply Industry. The recommended minimum ATPV for base garments is PPE (HRC 1) -- 4cal/cm2, and all opening/buttons/press studs/zippers are been covered by FR fabric. PPE1 ATPV: 4+ Cal/cm2 - Personal Protective Equipment (PPE) is an important line of defense in arc flash safety. NFPA 70E:2018 standard uses four categories of PPE, with each category including the minimum Arc Rating value for the required PPE. PPE 1: 4 cal/cm², PPE 2: 8 cal/cm², PPE 3: 25 cal/cm², PPE 4: 40 cal/cm²
- PPE2 ATPV: 8+ caI/cm2 - Personal Protective Equipment (PPE) is an important line of defense in arc flash safety. NFPA 70E:2018 standard uses four categories of PPE, with each category including the minimum Arc Rating value for the required PPE. PPE 1: 4 cal/cm², PPE 2: 8 cal/cm², PPE 3: 25 cal/cm², PPE 4: 40 cal/cm²
